Tell your friends about this item:
Q-switched and Mode Locked Short Pulses from a Diode Pumped, Yb-doped Fiber Laser Seth M Swift
Q-switched and Mode Locked Short Pulses from a Diode Pumped, Yb-doped Fiber Laser
Seth M Swift
Publisher Marketing: A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr4+: YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laserwere performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watt (W) while pumping at 8.3 W, yielding 60% efficiency and peak spectral outputs between 1087-1108 nm. Passive Q-switched pulses were generated using the Cr4+: YAGcrystal with a mean width of 2.9 s and repetition rates between 60-150 kHz. This corresponded to pulse energies of 7-24 and peak powers twice as high as the average power. Q-switched and possible mode locked pulses were generated using NPR. Q-switched pulse widths ranged between 1.8-2.8 with repetition rates between 29-72 kHz. Mode locked pulse widths were 10.5 ns with a repletion rate of 17.2 MHz. Mode locking was not achieved using the SESAM, but the results that resemble mode beating are presented, and causes for error were analyzed.
| Media | Books Paperback Book (Book with soft cover and glued back) |
| Released | October 9, 2012 |
| ISBN13 | 9781249595915 |
| Publishers | Biblioscholar |
| Pages | 118 |
| Dimensions | 189 × 246 × 6 mm · 226 g |
See all of Seth M Swift ( e.g. Paperback Book )